Name: | Kingcoat FT-600WB |
Introduction: |
A two-component, ambient temperature cure, waterborne epoxy top coat which is applied for coating on indoor cementitious substrates. When it cures, it forms a tough, hard and glossy finish, which gives a seamless,dustproof and easy to clean surface. The coat formed is resistant to many mild chemicals, oil and water. It allows the floor concrete to “breathe” and is eco-friendly in nature still it protects the surfaces by preventing algal and fungal growth. It is a versatile topping material, which can be used as a light-duty floor topping, alternative for tiles inWC area, residential flooring, water tank coating etc and is availablein custom color shades. |
Mixing Ratio: | A-component/B-component=3/1(weight) |
Package: | A-component=18kg, B-component=6kg |
Application Advantages
? Eco-friendly and suitable for potable water contact
? Breathable coat, which prevents blisters
? Resistance to mild chemicals, oil and water
? Creates a seamless, easy to clean surface
? Forms dustproof and glossy finish surface, or for tiling purpose, can be made available in non-skid variety
? Color choice available: green, grey and yellow. Custom colors can be supplied
? Good stain resistance
Application Procedure
While applying Kingcoat FT-600WB coat, surface preparation is the most important part. Remove all the loose materials to expose the base surface. Wash the surface with plenty of water. A 10% muriatic acid solution wash should follow. Again wash the surface with plenty of water. Let the surface dry to aturated surface dry (SSD) condition. Fill all the cracks, honey-combs, voids etc, using cement mortar or our Kingbond repair compound. Let the surface dry completely and polish it with grinding leveling. Apply a coat of Kingcoat FP-400WB liberally by brush or roller over the surface. Allow the surface to be touch-dry. Mix the A and B parts of Kingcoat FT-600WB thoroughly, to get a uniform consistency. Apply the first coat liberally by brush or roller over this primer coat. Allow the coat to cure for 12 hours. Again apply the second coat over the first coat,preferably in a perpendicular direction to the first coat. Let the system cure for 24 hours. Protect the treatment during the curing period from mechanical disturbances, water splashes, direct sunlight & heat.
Application Areas
? Light-duty Industrial manufacturing facilities, warehouses, airports
? Light-corrosive chemical and pharmaceutical industries
? Food processing and dairy plant flooring
? Car park, basement floors
? Institutional facilities, schools, residences, hospitals
? Commercial traffic floors